Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW1996850CI (E31) V12-5379CC 5.4L SOHC (M73)REPAIR AND DIAGNOSISA L L DIAGNOSTIC TROUBLE CODES ( DTC )TESTING AND INSPECTIONMANUFACTURER CODE CHARTSSTEERING COLUMN MEMORY (LSM)DEFECT CODE 6
1996 BMW 850Ci (E31) V12-5379cc 5.4L SOHC (M73)
Defect Code 6
1996 BMW 850Ci (E31) V12-5379cc 5.4L SOHC (M73)SECTION Defect Code 6
Defect Code 6:
*D* Defect code memory: 6 Position-time monitoring inclination:
Possible cause: Change in potentiometer voltage during adjustment not correct. Can be caused, for instance, by blocking of the steering column adjustment due to external obstruction (objects) or stiffness in the adjustment kinematics.
Effect of defect: Steering column adjustment is deactivated in the blocked inclination direction.
Troubleshooting: Check adjustment motors and adjustment kinematics for inclination adjustment and repair if necessary. Clear the defect code memory if no defect is found.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.