Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSBMW1995318IS AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALMECHANICALENGINE - REPAIR INSTRUCTIONS (M42)ENGINE, GENERALREMOVING ALTERNATOR MOUNTING BLOCK (M42)INSTALLATION

1995 BMW 318is Automatic

Removing alternator mounting block (M42): Installation

1995 BMW 318is AutomaticSECTION Installation

Replace sealing ring.

Fig 1: Pulling Out Oil Dipstick Guide Tube

G05621545

Courtesy of BMW OF NORTH AMERICA, INC.

Press out sleeve.

Unscrew bolts and remove mounting block.

Fig 2: Locating Mounting Block Bolts

G05621546

Courtesy of BMW OF NORTH AMERICA, INC.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.