Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSBMW1993740IL (E32/2) V8-3982CC 4.0L DOHC (M60)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTTECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSUPDATED MODIC(R) SOFTWARE - P8.0 PROGRAMMINGOVERVIEW
1993 BMW 740iL (E32/2) V8-3982cc 4.0L DOHC (M60)
Updated MoDic(R) Software - P8.0 Programming: Overview
1993 BMW 740iL (E32/2) V8-3982cc 4.0L DOHC (M60)SECTION Overview
Group 08
MODIC
Bulletin Number
08 04 96
Woodcliff Lake, NJ
October 1996
Product Engineering
This Service Information bulletin supersedes S.I. 08 04 96 dated June 1996 which should be removed and discarded from your S.I. binder.
SUBJECT:
Updated MODIC Software P8.0 Programming
MODEL:
ALL
Situation:
A revised and expanded version of the MODIC Programming Software has been developed. With the release of P8.0 MODIC Software, Version P7.2 Programming Software has become invalid.
Program Highlights
^ MODIC software version P8.0 (programming/encoding) will allow DME variant coding of the following engine control module versions: DME M1.1; M1.2; M1.3; M1.7, M1.7.2.
^ MODIC software version P8.0 (programming/encoding) will allow DME programming of the following engine control module versions: DME M3.1; M3.3.1; M3.3; M5.2 (M73).
^ MODIC software version P8.0 (programming/encoding) will allow DME flash programming of the following engine control module versions.
Engine Control Model Engine
Module DME
M5.2 318,Z3 M44
M5.2 540i,740i,840i M62
MS41.1 328i,528i M52
MS41.2 M3 S52/B32
For complete flash programming details refer to service information 12 05 96.
Applicable Service Actions Addressed by P 8.0
Parts Information
This diskette contains encoding and programming programs only. All diagnostic work should be done with the current diagnostic software.
Software Version 8.0 A/B
P/N 01 11 9 787 861
Introductory Price = $83.00
Any defective diskettes should be returned to BMW NA via the BMW Tool Warranty. Details of the program can be found in your Parts Information Binder under bulletin I-24 dated 4/95.
This software will be sent out via the Automatic Tool Shipment Program. Additional copies may be purchased through your Parts Distribution Center.
MODIC
Bulletin Number
08 04 96
Woodcliff Lake, NJ
October 1996
Product Engineering
This Service Information bulletin supersedes S.I. 08 04 96 dated June 1996 which should be removed and discarded from your S.I. binder.
SUBJECT:
Updated MODIC Software P8.0 Programming
MODEL:
ALL
Situation:
A revised and expanded version of the MODIC Programming Software has been developed. With the release of P8.0 MODIC Software, Version P7.2 Programming Software has become invalid.
Program Highlights
^ MODIC software version P8.0 (programming/encoding) will allow DME variant coding of the following engine control module versions: DME M1.1; M1.2; M1.3; M1.7, M1.7.2.
^ MODIC software version P8.0 (programming/encoding) will allow DME programming of the following engine control module versions: DME M3.1; M3.3.1; M3.3; M5.2 (M73).
^ MODIC software version P8.0 (programming/encoding) will allow DME flash programming of the following engine control module versions.
Engine Control Model Engine
Module DME
M5.2 318,Z3 M44
M5.2 540i,740i,840i M62
MS41.1 328i,528i M52
MS41.2 M3 S52/B32
For complete flash programming details refer to service information 12 05 96.
Applicable Service Actions Addressed by P 8.0
Parts Information
This diskette contains encoding and programming programs only. All diagnostic work should be done with the current diagnostic software.
Software Version 8.0 A/B
P/N 01 11 9 787 861
Introductory Price = $83.00
Any defective diskettes should be returned to BMW NA via the BMW Tool Warranty. Details of the program can be found in your Parts Information Binder under bulletin I-24 dated 4/95.
This software will be sent out via the Automatic Tool Shipment Program. Additional copies may be purchased through your Parts Distribution Center.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.