11 2 300 Plug mandrel

1992 BMW 318isSECTION 11 2 300 Plug mandrel

Minimum set: Mechanical toolsΒ 

NOTE: For locking crankshaft in ignition TDC position when adjusting timing

Engine: M21, M40, M41, M42, M43, M43TU, M44, M47, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57T2, M57TU, M60, M62, M62VAN, M70, M73, S50B30, S50B32, S54, S62

Storage location: C15

Order number: 11 2 300

Plug mandrel

Fig 1: Identifying Plug Mandrel (11 2 300)
G04745478Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.