Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSBMW1987L7 (E23) L6-3430CC 3.4L SOHC (M30)REPAIR AND DIAGNOSISSPECIFICATIONSCAPACITY SPECIFICATIONSFLUID - M/T
1987 BMW L7 (E23) L6-3430cc 3.4L SOHC (M30)
Fluid - M/T
1987 BMW L7 (E23) L6-3430cc 3.4L SOHC (M30)SECTION Fluid - M/T
NOTE: Inspect for a color coded fluid identification label, usually affixed to the passenger side of the transmission bellhousing. Verify fluid installed before topping off or refilling the transmission.
GREEN LABEL* GLS
RED LABEL* AF
NO LABEL** 80W GL-4
CAPACITY, Refill:
1983-84 533i, 633CSi, 733i 1.6 liters 3.4 pints
1983-85 318i 1.2 liters 2.5 pints
1983-88 528e 1.6 liters 3.4 pints
1985-87 535i, 635CSi, 735i 1.6 liters 3.4 pints
1987-90 M5 1.3 liters 2.7 pints
1988-89 635CSi, M6 1.3 liters 2.7 pints
1988-92 735i 1.3 liters 2.7 pints
1988-90 325i, 525i, 535i 1.3 liters 2.7 pints
1988-90 M3 1.2 liters 2.5 pints
1991-92 525i 1.0 liters 2.2 pints
1991-92 325i, 535i, M5 1.3 liters 2.7 pints
1991-92 850i 2.3 liters 4.8 pints
*Units that are factory filled with AF or GLS are fitted with 17mm external hex head drain and fill plugs.
**Units that are factory filled with GL-4 are fitted with 17mm internal hex (Allen) head drain and fill plugs.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.