Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Overview - Transmission Fluid Circuit
2024 Audi S3 PremiumSECTION Overview - Transmission Fluid Circuit
- Bleeder Cap
- O-Rings
- Replace
- Bolt
- 20 Nm
- Transmission Fluid Cooler
- Removing and Installing. Refer to TRANSMISSION FLUID COOLER, REMOVING AND INSTALLING .
- Transmission
- Removing and Installing. Refer to TRANSMISSION, REMOVING AND INSTALLING .
- Bolt
- Replace after removing
- M6x30: 8 Nm +45°
- M6x25: 8 Nm +90°
- Engine for Transmission Fluid Auxiliary Hydraulic Pump 1 -V475-
- Removing and Installing. Refer to ENGINE FOR Transmission Fluid Auxiliary Hydraulic Pump 1 - V475-, REMOVING AND INSTALLING .
- Seal
- Replace
- Transmission Fluid Filter
- Notes for oil change and filter replacement. Refer to the appropriate service information.
- Removing and Installing. Refer to TRANSMISSION FLUID FILTER, REMOVING AND INSTALLING .
- O-Ring
- Replace
- Coat with gear oil
- Filter Housing
- 50 Nm
- Heat Shield
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.