Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Securing On Engine And Transmission Holder
Special tools and workshop equipment required
- Holding Plate :VW 309A
- or Holding Plate :VW 309 A
- Transmission Support :VW 353
- Engine and Gearbox Bracket :VAS 6095A
Transmission, Securing to Engine/Transmission Holder
-- Mount the transmission to the Transmission Support :VW 353 and place it, with the Holding Plate :VW 309 in the Engine and Gearbox Bracket VAS 6095A :VAS 6095 .
Tip
Fluid leakage when turning the transmission.
- Vents for the transmission housing must be closed when turning a filled transmission on the engine and transmission holder with the bleeder downward.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.