Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
A/C System Repair Information
2024 Audi S3 PremiumSECTION A/C System Repair Information
WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- A/C systems designed for refrigerant R12 are only to be filled with refrigerant R134a if certain requirements are fulfilled. Refer to Refer to REFRIGERANT CIRCUIT, CONVERTING R12 TO R134A AND SERVICING and Repair Information: A/C System with R12 Parts 2 and 3. This Repair Information is only available in hard copy.
- The refrigerant oils specifically developed for R134a and R12 refrigerant circuits are never to be mixed.
- A/C service stations that come in contact with refrigerant are only to be used for the intended refrigerant.
- Components of R134a refrigerant circuits can be identified by their markings, green labels or design (such as different threads) to prevent interchanging with components designed for refrigerant R12.
- An information label indicating the refrigerant used is provided in the engine compartment on the lock carrier or in the plenum chamber.
- Different refrigerants are never to be mixed.
NOTE:
Pay attention to the information when working on the refrigerant circuit. Refer to "Refrigerant Circuit General Precautions". Refer to REFRIGERANT CIRCUIT GENERAL PRECAUTIONS .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.