Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Overview - Battery
2024 Audi Q4 e-tron Premium, AWDSECTION Overview - Battery
- Positive Terminal Battery Terminal Clamp
- 5 Nm
- Positive Cable
- Positive Terminal Cover
- Positive Jump Start, Nut
- 20 Nm
- Negative Terminal Cover
- Negative Jump Start, Nut
- 20 Nm
- Ground Wire
- With battery terminal clamp for the negative terminal
- With Battery Monitoring Control Module -J367-
- Refer to GROUND CABLE WITH BATTERY MONITORING CONTROL MODULE -J367-, REMOVING AND INSTALLING .
- Refer to Battery Monitoring Control Module -J367-, Adapting .
- 5 Nm
- Battery -A-
- Refer to the appropriate Service Information .
- Refer to Battery, Disconnecting and Connecting .
- Bolt
- 20 Nm
- Bracket
- Bolt
- Quantity: 3
- 9 Nm
- Battery Tray
- Refer to Battery Tray, Removing and Installing .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.