Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Steering Column, Handling And Transporting
Risk of damaging the steering column due to improper handling.
There is a possible safety risk when the steering functions are impaired.
- Note the following instructions for handling the steering column.
Incorrect handling of steering column
Transporting the following components can cause damage to the steering column and can lead to serious personal injury
- Motors, spindles, connectors, and wiring harness
The steering column must not have any mechanical load:
- A steering column that has fallen onto a hard surface or shows signs of damage must not be installed in the vehicle.
- Do not lay the steering column on the stub shafts -1 and 2-.
- The stub shafts must not get compressed.
Incorrect handling of the steering column with dynamic steering
- Do not rotate the steering column with dynamic steering.
Correct handling and transport of steering column
-- Transport steering column using two hands.
-- Hold the steering column at the upper column tube -1- and in the stub shaft area -2- on the upper universal joint.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.