2021 Audi e-tron Quattro Premium PlusFACTORY OEM SERVICE PROCEDURE

Shift Mechanism, Checking: Notes

CAUTION:

Risk of accident due to the uncontrolled movement of the vehicle

When the motor is running, uncontrolled vehicle movement is possible if a drive position is engaged.

- Move the shifter to the "P" position.

- Engage the parking brake.

  • All test points must be performed.
  • When the specified values are not reached, check if the shifter is installed correctly. Refer to SHIFT MECHANISM, REMOVING AND INSTALLING  and perform the "Guided Fault Finding"  function using the Vehicle Diagnostic Tester.

Overview:

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.