SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2019S5 PRESTIGE, 2D COUPEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 50 (COMMUNICATION)91 COMMUNICATIONEXTERNAL MULTIMEDIA DEVICE CONNECTIONCONNECTORS FOR EXTERNAL MULTIMEDIA DEVICE CONNECTIONAUX IN - USB CONNECTION BASEPLATE -R193-, THROUGH MY 2016
2019 Audi S5 Prestige, 2D Coupe

AUX IN - USB Connection Baseplate -R193-, THROUGH MY 2016

2019 Audi S5 Prestige, 2D CoupeSECTION AUX IN - USB Connection Baseplate -R193-, THROUGH MY 2016
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2020 Audi S3, 2020 Audi RS 3, 2020 Audi A3 Quattro, 2020 Audi A3, and 2019 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Unlisted connector terminals are not assigned.

AUX IN - USB Connection Baseplate R193 

GWWA91-12022Courtesy of AUDI OF AMERICA, LLC
  1. 7-Pin Connector -T7-
  2. 4-Pin Connector -T4s-

1 - 7-Pin Connector T7 

GWWA91-12022Courtesy of AUDI OF AMERICA, LLC

All pins are connected to the Information Electronics Control Module 1 -J794-.

  1. Ground
  2. D (-)
  3. Not Assigned
  4. D (+)
  5. Ground Shielding
  6. USB, +5V
  7. USB, Ground

2 - 4-Pin Connector T4s 

GWWA91-12022Courtesy of AUDI OF AMERICA, LLC

All pins are connected to the Information Electronics Control Module 1 -J794-.

  1. LF right
  2. LF ground
  3. LF left
  4. LF ground
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.