Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2019S5 PRESTIGE, 2D COUPEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 197 (EXTERIOR EQUIPMENT)66 EXTERIOR EQUIPMENTMOLDINGS, TRIMS, EXTENSIONS AND TRIM PANELSOVERVIEW - TRIM MOLDING AND COVERSOVERVIEW - WINDSHIELD FRAME TRIM
2019 Audi S5 Prestige, 2D Coupe
Overview - Windshield Frame Trim
2019 Audi S5 Prestige, 2D CoupeSECTION Overview - Windshield Frame Trim
WARNING: This page is about a different car, the 2019 Audi S5 Sportback, 2019 Audi RS 5 Sportback, and 2018 Audi S5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
- Clip
- Replace after removing.
- For the windshield frame trim
- Removing and Installing. Refer to WINDSHIELD FRAME TRIM, REMOVING AND INSTALLING .
- Quantity: 5
- Pop Rivet
- For the clip
- Quantity: 3
- Nut
- 4.5 Nm
- Quantity: 2
- Windshield Frame Trim
- Replace after replacing the clips
- Removing and Installing. Refer to WINDSHIELD FRAME TRIM, REMOVING AND INSTALLING .
- Nut
- 4.5 Nm
- Pop Rivet
- For the clip
- Quantity: 3
- Clip
- Replace after removing.
- For the side windshield frame trim
- Removing and Installing. Refer to SIDE WINDSHIELD FRAME TRIM, REMOVING AND INSTALLING .
- Quantity: 2
- Side Windshield Frame Trim
- Replace after replacing the clips
- Removing and Installing. Refer to SIDE WINDSHIELD FRAME TRIM, REMOVING AND INSTALLING .
- Clip
- Replace after removing.
- For the side windshield frame trim
- Bonded
- Removing and Installing. Refer to SIDE WINDSHIELD FRAME TRIM, REMOVING AND INSTALLING .
- Pop Rivet
- For the clip
- Quantity: 2
- Clip
- For the side windshield frame trim
- Removing and Installing. Refer to SIDE WINDSHIELD FRAME TRIM, REMOVING AND INSTALLING .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.