Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Rear Muffler Heat Shield, Removing And Installing: Removing
-- Loosen the rear muffler mounting and lower it slightly using the Engine and Gearbox Jack: VAS6931 . Refer to OVERVIEW - MUFFLER .
-- Remove the nuts -arrows-.
-- Remove the heat shield -1-.
TIP:
g-tron: the retaining pieces from the left heat shield are different then the above illustration.
- Left heat shield: 4 nuts
- Right heat shield: 3 nuts
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.