ABS Control Module -J104- /ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING: Notes

2019 Audi S5 Prestige, 2D CoupeSECTION Notes
WARNING: This page is about a different car, the 2019 Audi S5 Sportback, 2019 Audi RS 5 Sportback, and 2018 Audi S5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

  • Vehicle Diagnostic Tester
  • Torque Wrench 1331 5-50Nm: VAG1331 
  • Brake Pedal Actuator: VAG1869/2  .
  • Bleeder bottle from the Brake Charger/Bleeder Unit: VAS5234 
  • Engine Bung Set: VAS6122 
  • Safety Gloves

Component location. Refer to OVERVIEW - ABS/ESP .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.