Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Pr Number Allocation - Brakes
Vehicle Data Label, Example
The corresponding PR number on the vehicle data label indicates which brakes are installed on the vehicle, among other things.
A - Rear Brakes (Example)
B - Front Brakes (Example)
Vehicle data label component location. Refer to VEHICLE DATA LABEL
ELSA/Vehicle-Specific Notes
The relevant information regarding the brakes installed can also be obtained through ELSA/vehicle-specific notes.
1KU - Rear Brakes (Example)
1LJ - Front Brakes (Example)
- Allocation. Refer to the Parts Information.
- Refer to TECHNICAL DATA for the PR number code key. These are important for the brake caliper/brake rotor and brake pad combination.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.