Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Seat Belt Webbing, Checking
2019 Audi S5 Prestige, 2D CoupeSECTION Seat Belt Webbing, Checking
Procedure
-- Pull the belt completely out of the automatic belt retractor or lap belt adjustment tongue.
-- Check the seat belt webbing for contamination, wash with mild soapy water if necessary. Refer to the Owner's Manual.
- If one of the types of damage (1 and 2) shown in the following is detected on a vehicle which has been in an accident - replace the entire seat belt with seat belt latch.
- If damage as illustrated under points 1, 2 or 3 is determined on a vehicle that has not been in an accident, only replace the damaged seat belt.
- 1 - Seat belt webbing cut, torn or frayed.
- 2 - Webbing loops on seat belt edge torn.
- 3 - Burn marks from cigarettes or similar.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.