Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Control Module/Digital Sound System Amplifier, Removing And Installing, Cabriolet: Removing
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the luggage compartment left trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the Relay and Fuse Panel 2 -SR2- and pivot to the side with the lines still attached. Refer to OVERVIEW - RELAY PANELS, FUSE PANELS AND E-BOXES .
-- Remove the Comfort System Central Control Module -J393- with the bracket and pivot to the side with the lines still attached. Refer to COMFORT SYSTEM CENTRAL CONTROL MODULE -J393-, REMOVING AND INSTALLING .
The bracket -2- with the Digital Sound System Control Module -J525- -1- must be removed first.
-- Remove the nuts -arrows- and pivot out the bracket -2- with the control modules.
-- Release and disconnect the connectors from the Digital Sound System Control Module -J525- -1-.
-- Insert the : VAS6223/9 -1- onto the MOST bus connector -2-.
-- Remove the bolts -arrows- and remove the Digital Sound System Control Module -J525- -1- from the bracket -2-.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.