Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2018A5 QUATTRO PRESTIGE, 2D CONVERTIBLEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT VARIANT/TRIMSECTION 12 (AIR CONDITIONING [COUPE])87 AIR CONDITIONINGADDITIONAL COMPONENTS FOR CONTROL AND REGULATIONSUNLIGHT PHOTO SENSOR -G107-, REMOVING AND INSTALLINGNOTES
2018 Audi A5 Quattro Prestige, 2D Convertible
Sunlight Photo Sensor -G107-, REMOVING AND INSTALLING: Notes
2018 Audi A5 Quattro Prestige, 2D ConvertibleSECTION Notes
WARNING: This page is about a different variant/trim than selected.
- Depending on the vehicle model, the Sunlight Photo Sensor -G107- may not be in the defroster vent in 2016 or 2017 and was then installed in the mirror base. Refer to Humidity Sensor -G355-, Rain/Light Recognition Sensor -G397-, AND Sunlight Photo Sensor -G107-, REMOVING AND INSTALLING . For vehicles which were produced in the transition period, a Sunlight Photo Sensor -G107- is installed instead in the defroster vent; it is however not wired.
- On the Audi Q5, the Sunlight Photo Sensor -G107- is installed in the mirror base. Refer to Humidity Sensor -G355-, Rain/Light Recognition Sensor -G397-, AND Sunlight Photo Sensor -G107-, REMOVING AND INSTALLING .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.