Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2018A5 QUATTRO PRESTIGE, 2D CONVERTIBLEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 94 (AIR CONDITIONING (A/C COMPRESSOR))
2018 Audi A5 Quattro Prestige, 2D Convertible
Section 94 (Air Conditioning (A/C Compressor))
2018 Audi A5 Quattro Prestige, 2D ConvertibleSECTION Section 94 (Air Conditioning (A/C Compressor))
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2020 Audi S3, 2020 Audi RS 3, 2020 Audi A3 Quattro, 2020 Audi A3, and 2019 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.
- 87 Air Conditioning
- A/C Compressor
- Actuators
- Temperature Regulator Door Motor -V68- WITH Temperature Regulator Door Motor Position Sensor -G92-, REMOVING AND INSTALLING
- Defroster Door Motor -V107- WITH Defroster Door Motor Position Sensor -G135-, REMOVING AND INSTALLING
- Recirculation Door Motor -V113-, REMOVING AND INSTALLING
- Left Temperature Door Motor -V158- WITH Left Temperature Door Potentiometer/Actuator -G220-, REMOVING AND INSTALLING
- Right Temperature Door Motor -V159- WITH Right Temperature Door Potentiometer/Actuator -G221-, REMOVING AND INSTALLING
- Fresh Air/Recirculating Air/Back Pressure Door Motor -V425- WITH Fresh Air/Recirculating Air/Back Pressure Door Motor Position Sensor -G644-, REMOVING AND INSTALLING
- Fresh Air/Recirculating Air/Back Pressure Door Motor Adjuster, Removing And Installing
- Air Distribution Door Motor -V428- WITH Air Distribution Door Motor Position Sensor -G645-, REMOVING AND INSTALLING
- Front Air Distribution Door Motor -V426- WITH Front Air Distribution Door Motor Position Sensor -G642-, REMOVING AND INSTALLING
- Air Distribution Door Adjuster, Removing And Installing
- Front Heater And A/C Unit
- Overview - Heater And A/C Unit
- Overview - Attachments For Heater And A/C Unit And Air Intake Housing
- Overview - Evaporator Housing
- Overview - Air Distribution Housing Doors And Partitions
- Evaporator, Removing And Installing
- Evaporator, Cleaning
- Evaporator Vent Temperature Sensor -G263-, REMOVING AND INSTALLING
- Left/Right Vent Temperature Sensor -G150- / -G151-, Removing And Installing
- Heater And A/C Unit, Removing And Installing
- Heater And A/C Unit Bracket, Removing And Installing
- Heater And A/C Unit, Disassembling And Assembling
- Air Distribution Housing, Removing And Installing
- Dust And Pollen Filter, Removing And Installing
- Fresh Air Blower -V2-, REMOVING AND INSTALLING
- Fresh Air Blower Control Module -J126-, REMOVING AND INSTALLING
- Footwell Vent Temperature Sensor -G192-, REMOVING AND INSTALLING
- Auxiliary Heater Heating Element -Z35-, REMOVING AND INSTALLING
- Heater Core, Removing And Installing
- Heater Core Coolant Pipes, Removing And Installing
- Condensation Drain Hose, Checking
- Condensation Water Drain Hose, Removing And Installing
- Air Guide
- Overview - Air Routing And Air Distribution In Passenger Compartment
- Front Vents, Removing And Installing
- Rear Vents, Removing And Installing
- Air Distribution Channels, Removing And Installing
- Air Intake Duct, Removing And Installing
- Water Channel, Removing And Installing
- Fresh Air Intake, Removing And Installing
- Passenger Compartment Forced Air Extraction, Checking
- Passenger Compartment Forced Air Extraction, Removing And Installing
- Plenum Chamber Water Drain, Checking
- Display And Control Head
- Coolant Circuit, Removing And Installing
- High Voltage Heater (PTC) -Z115-, INCORPORATION, IN THE COOLANT CIRCUIT
- High Voltage Battery Heat EXCHANGER In The High Voltage System Coolant Circuit, Incorporation
- High Voltage Battery Coolant Valve -N688-, REMOVING AND INSTALLING
- Engine Coolant Circulation Pump 2 -V178-, REMOVING AND INSTALLING
- After-Run Coolant Pump -V51-
- Coolant Shut-Off Valve -N82-
- Coolant Change-Over Valve 1 -N632-, REMOVING AND INSTALLING
- Coolant Change-Over Valve 2 -N633-, REMOVING AND INSTALLING
- High Voltage Battery Heat EXCHANGER, Removing And Installing
- High-Voltage Heater (PTC) -Z115- (WITH High-Voltage Heater (PTC) Control Module -J848-), REMOVING AND INSTALLING
- Additional Components For Control And Regulation
- Sunlight Photo Sensor -G107-, REMOVING AND INSTALLING
- Outside Air Temperature Sensor -G17-, REMOVING AND INSTALLING
- Air Quality Sensor -G238- FUNCTION
- Air Quality Sensor -G238-, CHECKING
- Humidity Sensor in Fresh Air Intake Duct -G657- FUNCTION
- Air Quality Sensor -G238- /Humidity Sensor in Fresh Air Intake Duct -G657-, REMOVING AND INSTALLING
- Humidity Sensor -G355- Rain/Light Recognition Sensor -G397- Sunlight Photo Sensor -G107-, Removing And Installing
- Electrical A/C Compressor Fuse, Removing And Installing
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.