Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2018A5 QUATTRO PRESTIGE, 2D CONVERTIBLEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 66 (GENERAL (SUSPENSION), TECHNICAL DATA)00 GENERAL, TECHNICAL DATAREPAIR INFORMATIONGUIDELINES FOR CLEAN WORKING CONDITIONS
2018 Audi A5 Quattro Prestige, 2D Convertible
Guidelines For Clean Working Conditions
2018 Audi A5 Quattro Prestige, 2D ConvertibleSECTION Guidelines For Clean Working Conditions
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2020 Audi S4, 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, and 2019 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Thoroughly clean connecting points and their surrounding areas before loosening.
- Place removed parts on a clean surface and cover them so that they do not get dirty. Use foil and paper. Only use lint-free cloths.
- Only install clean parts: Remove the replacement parts from their packaging just before installing them.
- Only use greases and sealants that are designated with part numbers.
- Carefully cover or seal opened components if the repair is not performed immediately.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.