Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2018A5 QUATTRO PRESTIGE, 2D CONVERTIBLEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 251 (CONTROLS, HOUSING (1 OF 2))34 CONTROLS, HOUSINGATFATF LEVEL, CHECKINGASSEMBLING
2018 Audi A5 Quattro Prestige, 2D Convertible
ATF Level, Checking: Assembling
2018 Audi A5 Quattro Prestige, 2D ConvertibleSECTION Assembling
WARNING: This page is about a different car, the 2022 Audi A4 allroad, 2021 Audi A4 allroad, and 2020 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The ATF check and fill hole must be sealed off again before the ATF reaches 45 °C (113 °F).
-- Tighten the plug on the inspection and fill hole or close the plugs all the way. The ATF level test is now completed.
Tightening Specifications
- Plug: -item ) Drain and Plug - List Item: Plugs.
- Refer to OVERVIEW - NOISE INSULATION .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.