SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2018A5 QUATTRO PRESTIGE, 2D CONVERTIBLEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 213 (AIR CONDITIONING)87 AIR CONDITIONINGREFRIGERANT CIRCUITCONDENSER, REMOVING AND INSTALLINGINSTALLING
2018 Audi A5 Quattro Prestige, 2D Convertible

Condenser, Removing And Installing: Installing

2018 Audi A5 Quattro Prestige, 2D ConvertibleSECTION Installing
WARNING: This page is about a different car, the 2022 Audi A4 allroad, 2021 Audi A4 allroad, and 2020 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following: 

-- There is refrigerant oil in the removed condenser that must be redelivered to the refrigerant circuit (with new condenser). Refer to Refrigerant Circuit Components, Replacing or COMPONENTS, REPLACING .

-- Evacuate and charge the refrigerant circuit. Refer to Refrigerant Circuit , Working with A/C Service Station or Working with A/C Service Station .

-- Start the A/C system after charging the refrigerant circuit. Refer to A/C SYSTEM, STARTING AFTER CHARGING REFRIGERANT CIRCUIT .



Install in reverse order of removal and note the following: 

-- There is refrigerant oil in the removed condenser that must be redelivered to the refrigerant circuit (with new condenser). Refer to Refrigerant Circuit Components, Replacing or COMPONENTS, REPLACING .

-- Evacuate and charge the refrigerant circuit. Refer to Refrigerant Circuit , Working with A/C Service Station or Working with A/C Service Station .

-- Start the A/C system after charging the refrigerant circuit. Refer to A/C SYSTEM, STARTING AFTER CHARGING REFRIGERANT CIRCUIT .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.