SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2018A5 QUATTRO PRESTIGE, 2D CONVERTIBLEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 163 (GENERAL, TECHNICAL DATA (BRAKE SYSTEM))00 GENERAL, TECHNICAL DATABRAKE INSPECTIONFWD VEHICLES, CHECKING
2018 Audi A5 Quattro Prestige, 2D Convertible

Fwd Vehicles, Checking

2018 Audi A5 Quattro Prestige, 2D ConvertibleSECTION Fwd Vehicles, Checking
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2020 Audi S3, 2020 Audi RS 3, 2020 Audi A3 Quattro, 2020 Audi A3, and 2019 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.

Test on a one-axle roller test stand

  • The operation takes place on a test stand.
  • For vehicles with manual transmission engage idle.
  • On vehicles with an automatic or DSG transmission engage the "N" gear.

Test Sequence:

  • The brake inspection is to be performed on a one-axle roller test stand.
  • The test speed must not exceed 6 km/h, otherwise the brakes may lock up due to the roller start-up delay (EDL regulation).
  • Test stands approved by Audi meet these requirements.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.