Technical Data: Capacities

2018 Audi A5 Quattro Prestige, 2D ConvertibleSECTION Capacities
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 Audi S3, 2020 Audi A3, 2019 Audi S3, 2019 Audi A3, and 2018 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.
Capacities FWD Dual-Clutch Transmission 0GC quattro Dual-Clutch Transmission 0GC
Refill Refer to MAINTENANCE, DIAGNOSIS Refer to MAINTENANCE, DIAGNOSIS
Change Refer to MAINTENANCE, DIAGNOSIS Refer to MAINTENANCE, DIAGNOSIS
Change Interval Refer to the MAINTENANCE, DIAGNOSIS . Refer to the MAINTENANCE, DIAGNOSIS .
Grease Dual-clutch transmission oil. Refer to the Parts Information. Dual-clutch transmission oil. Refer to the Parts Information.

-- Transmission Fluid Level, Checking and Filling. Refer to TRANSMISSION FLUID LEVEL, CHECKING .

-- Fill with transmission fluid after repairs. Refer to TRANSMISSION FLUID, DRAINING AND FILLING .

Capacities Bevel Box 0CN Bevel Box 0FN Bevel Box 0AV Bevel Box 0FV
Refill Refer to MAINTENANCE, DIAGNOSIS Refer to MAINTENANCE, DIAGNOSIS Refer to MAINTENANCE, DIAGNOSIS Refer to MAINTENANCE, DIAGNOSIS
Change Refer to MAINTENANCE, DIAGNOSIS Refer to MAINTENANCE, DIAGNOSIS Refer to MAINTENANCE, DIAGNOSIS Refer to MAINTENANCE, DIAGNOSIS
Change Interval Permanent fill no change necessary Permanent fill no change necessary Permanent fill no change necessary Permanent fill no change necessary
Grease Gear oil. Refer to the Parts Information. Gear oil. Refer to the Parts Information. Gear oil. Refer to the Parts Information. Gear oil. Refer to the Parts Information.

-- Check the gear oil level. Refer to GEAR OIL, CHECKING LEVEL .

-- Gear oil, filling after repairs. Refer to GEAR OIL, DRAINING AND FILLING .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.