SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2018A5 QUATTRO PRESTIGE, 2D CONVERTIBLEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 137 (COMMUNICATION)91 COMMUNICATIONREARVIEW CAMERA SYSTEMOVERVIEW - REARVIEW CAMERA SYSTEMOVERVIEW - REARVIEW CAMERA SYSTEM, FROM MY 2017
2018 Audi A5 Quattro Prestige, 2D Convertible

Overview - Rearview Camera System, From My 2017

2018 Audi A5 Quattro Prestige, 2D ConvertibleSECTION Overview - Rearview Camera System, From My 2017
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2020 Audi S3, 2020 Audi RS 3, 2020 Audi A3 Quattro, 2020 Audi A3, and 2019 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.

The rear view camera system (KA2) assists the driver during back-up driving for diagonal and parallel parking for trailer towing and watching cross traffic by providing the driver with an image of the traffic situation behind the vehicle via the Front Information Display Control Head -J685-.

The rear view camera system is switched on when engaging the reverse gear. The system can be activated manually by pressing the Parking Aid Button -E266- in the instrument panel (optional).

The rear view camera system consists of the following components:

  • Rearview Camera -R189-
  • The Rearview Camera System Control Module -J772- (integrated in the Rearview Camera -R189-)
  • Information Electronics Control Module 1 -J794-
  • Front Information Display Control Head -J685-

Other control modules may be installed as optional equipment.

It is not permitted to install an auxiliary license plate for vehicles with rear view camera system as it could impair the function of the rear view camera system.

Fault finding is performed via "Guided Fault Finding"  using Vehicle Diagnostic Tester.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.