Special Tools

2018 Audi A5 Quattro Prestige, 2D ConvertibleSECTION Special Tools

Special tools and workshop equipment required 

  • Analog/Digital Multimeter: FLU83III 
    Fig 1: Analog/Digital Multimeter VAG1526B
    GWWW00-10023Courtesy of AUDI OF AMERICA, LLC
  • Puller - Bevel Gear: T10474 
    Fig 2: Identifying Puller - Bevel Gear T10474
    GWWW00-10992Courtesy of AUDI OF AMERICA, LLC
  • Torque Wrench 1332 40-200Nm: VAG1332 
    Fig 3: Identifying Torque Wrench 1332
    GWWW00-11165Courtesy of AUDI OF AMERICA, LLC
  • Inner Hex Socket 8 mm or TORX T50
  • Battery Charger: VAS5095A 
    Fig 4: Battery Charger VAS5095A
    GWWW00-10177Courtesy of AUDI OF AMERICA, LLC
  • Battery Tester with Printer: VAS5097A 
    Fig 5: Battery Tester with Printer VAS5097A
    GWWW00-1177Courtesy of AUDI OF AMERICA, LLC
  • Battery Charger: VAS5900 
    Fig 6: Battery Charger VAS5900
    GWWW00-10182Courtesy of AUDI OF AMERICA, LLC
  • Battery Charger: VAS5903 
    Fig 7: Battery Charger VAS5903
    GWWN27-10610Courtesy of AUDI OF AMERICA, LLC
  • Battery Charger: VAS5906 
    Fig 8: Battery Charger VAS5906
    GWWW00-10798Courtesy of AUDI OF AMERICA, LLC
  • Solar Battery Maintainer: VAS6102A 
    Fig 9: Identifying Solar Panel VAS 6102 A
    GWWW00-10800Courtesy of AUDI OF AMERICA, LLC
  • Battery Tester : VAS6161 
    Fig 10: Battery Tester VAS 6161
    GWWW00-10793Courtesy of AUDI OF AMERICA, LLC
  • Generator Belt Socket: 3310 
    Fig 11: 3310 Socket
    GWWW00-0299Courtesy of AUDI OF AMERICA, LLC
  • Multi-Tooth Adapter: 3400 
    Fig 12: Identifying Multi-Tooth Adapter 3400
    GWWW00-11138Courtesy of AUDI OF AMERICA, LLC
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.