Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Emergency Call Module Antenna -R263-, REMOVING AND INSTALLING, SPORTBACK, THROUGH MY 2018 AND FROM MY 2019, WITHOUT CONNECT PLUS (IV0): Notes
For vehicles without tinted glass (4GF/4GS), the Emergency Call Module Antenna -R263- is located under the instrument panel on the air guide/defrost intermediate piece. To remove and install, refer to Remove on Vehicles without Tinted Glass (4GF/4GS) .
For vehicles with tinted glass (4GR/4GY), the Emergency Call Module Antenna -R263- is located on the left rear seat belt guide. To remove and install, refer to Removing on Vehicles with Tinted Glass (4GR/4GY) .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.