Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Traction Battery -A2- Rear Outlet Air Guide, Removing And Installing: Installing
Installation is carried out in the reverse order while Observing The Following.
Use several bolts -3- to attach the air guide to the battery cooling module -1- if one of the tabs -4- breaks off.
-- Push the air guide -2- onto the battery cooling module -1-. The tabs -4- on the left and right must click into place.
-- Reinstall the removed parts in the opposite order.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.