Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
ANC Microphone -R142- / -R143- / -R144- / -R145-, Removing And Installing: Removing
It is necessary to lower the headliner on each side in order to remove the ANC microphones.
-- Lower the headliner, refer to Roof Frame Trim Panel, Removing and Installing .
-- Disconnect the connector -2- from each microphone.
-- Pry the microphone -1- out of the retainer and then remove it from the headliner -3-.
The cover -4- remains inside the headliner.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.