SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2013S4 PREMIUM PLUS, STANDARD TRANSREPAIR AND DIAGNOSISQUICK LOOKUPSTECHNICAL BULLETINSTECHNICAL SERVICE BULLETINSOTHER VARIANTENGINE CONTROL SYSTEMSMIL ON (DTC P164B(00) (GROUP 01, NO. 14-85)
2013 Audi S4 Premium Plus, Standard Trans

Mil On (DTC P164B(00) (GROUP 01, NO. 14-85)

2013 Audi S4 Premium Plus, Standard TransSECTION Mil On (DTC P164B(00) (GROUP 01, NO. 14-85)
WARNING: This page is about the S4 Premium Plus, Automatic DCT Trans, which is a different variant/trim than selected.
Publication date: 2014-07-28
Reference number: GROUP 01, NO. 14-85
Supersedes refnos: 2036761, GROUP 01, NO. 14-71

MIL ON (DTC P164B(00)

MIL ON (DTC P164B(00)

TECHNICAL SERVICE BULLETIN

Reference Number(s): GROUP 01, NO. 14-85 (2036761/2), Date of Issue:  July 28, 2014
AUDI: S4, S5, S5 Cabriolet, A6, A7, Q5, Q7 2011 - 2014
GROUP: 01 - On-Board Diagnostic
Superceded Bulletin(s): GROUP 01, NO. 14-71, Date of Issue:  March 13, 2014

01 14 85 2036761/2 July 28, 2014. Supersedes Technical Service Bulletin Group 01 number 14-71 dated March 13, 2014.

APPLICABLE MODELS AND YEARS

Model(s) Year VIN Range Vehicle-Specific Equipment
S4, S5, S5 Cabriolet, A6, A7, Q5, Q7 2011 - 2014 All 3.0 FSI

CONDITION

  • MIL on.
  • The following DTC is stored in the engine control module, J623 (address word 01):
    • DTC P164B(00)  (Oil pressure switch malfunction).

TECHNICAL BACKGROUND

The oil pressure switch is defective.

PRODUCTION SOLUTION

Updated oil pressure switch.

SERVICE

  1. Perform GFF test plan.
  2. If GFF instructs to replace the oil pressure switch F22, or if the test plan is inconclusive, replace the oil pressure switch F22. Use updated part number 06E919081G.

WARRANTY

WARRANTY INFORMATION

Claim Type:  Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin is informational only.
Service Number:  1705
Damage Code:  0010
Labor Operations:  Replace oil pressure switch 1705 19XX (See Elsa) See Elsa
Diagnostic Time:  GFF 0150 0000 Time stated on diagnostic protocol (max 30 TU)
Road test prior to service procedure No allowance 0 TU
Road test after service procedure 0121 0004 10 TU
Technical diagnosis at dealer's discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:  As per TSB # 2036761/1

All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual  . Claims are subject to review or audit by Audi Warranty.

REQUIRED PARTS AND TOOLS

PARTS INFORMATION

Part number Part Description Quantity
06E919081G Oil pressure switch 1

ADDITIONAL INFORMATION

All parts and service references provided in this TSB (2036761) are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.