87 A/C Compressor Replacement (GROUP 87, NO. 18-88)

2013 Audi S4 Premium Plus, Standard TransSECTION 87 A/C Compressor Replacement (GROUP 87, NO. 18-88)
WARNING: This page is about the S4 Premium Plus, Automatic DCT Trans, which is a different variant/trim than selected.
Publication date: 2018-07-30
Reference number: GROUP 87, NO. 18-88
Supersedes refnos: 2035582, 2035582/2, 2035582/3, GROUP 87, NO. 13-46, GROUP 87, NO. 14-58

87 A/C COMPRESSOR REPLACEMENT

87 A/C COMPRESSOR REPLACEMENT

TECHNICAL SERVICE BULLETIN

Reference Number(s): GROUP 87, NO. 18-88 (2035582/3), Date of Issue:  July 30, 2018
AUDI: All Models 2009 - 2017
GROUP: 87 - Air Conditioner
Superceded Bulletin(s): GROUP 87, NO. 14-58, Date of Issue:  October 17, 2014

APPLICABLE MODELS AND YEARS

87 18 88 2035582/3 July 30, 2018. Supersedes Technical Service Bulletin Group 87 number 14-58 dated October 17, 2014 for reasons listed below.

APPLICABLE MODELS AND YEARS

Model(s) Year VIN Range Vehicle-Specific Equipment
All 2009 - 2017 All Not Applicable

CONDITION

REVISION HISTORY

Revision Date Purpose
3 - Revised header data (Added model year)
2 10/17/2014 Revised header data (Added model years)
1 10/21/2013 Initial publication

The A/C Compressor has been diagnosed as faulty and will be replaced under warranty

TECHNICAL BACKGROUND

When performing replacement of an A/C Compressor under warranty, the amount of refrigerant and oil recovered must be documented.

PRODUCTION SOLUTION

Not applicable.

SERVICE

Use the Robinair A/C Service Unit to create a printed-out report showing the amount of refrigerant and oil recovered. This report must be submitted with the defective A/C compressor. Follow the steps below:

  1. Ensure that the A/C service unit shows the correct date and time (Figure 1). If the date and time are incorrect, use the menu to program the correct date and time before proceeding.
    G12049606
  2. Connect the A/C service unit to the vehicle.
  3. Perform a recovery of the system (Figure 2).
    G12049607
  4. Record values for RECOVERED  and OIL DRAINED  (Figure 3) on the repair order.
    G12049608
  5. Immediately after recovery, select the Print  button (Figure 4).
    G12049609
  6. When the SELECT PRINT TYPE screen opens, use the keypad to select 2) RECOVER CHARGE  (Figure 5).
    G12049610
  7. On the next screen, use the keypad enter the last 8 digits of the VIN then press the START/YES  key (Figure 6).
    G12049611
  8. The next screen will request the license plate (Figure 7). Entering the license plate is not necessary. Press the START/YES  key to continue.
    G12049612
  9. The A/C service unit will create a printed report (Figure 8). Send the printed report with the defective A/C compressor. Package the defective compressor in empty packaging from the replacement compressor.
    G12049613

WARRANTY

This TSB is informational only and not applicable to any Audi Warranty.

REQUIRED PARTS AND TOOLS

TOOLS INFORMATION

Tool Number Tool Description Quantity
ROB134APF Robinair A/C Service Unit 01

ADDITIONAL INFORMATION

All parts and service references provided in this TSB (2035582) are subject to change and/or removal. Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.

©2018 Audi of America, Inc  . All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.