Memory Seat/Steering Column Adjustment Control Module, Removing And Installing: Removing

2013 Audi A5 Premium Quattro, 2D Convertible, Eng CD CAEBSECTION Removing
WARNING:
  • Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
  • Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.

-- Remove The Front Seat:Β 

-- Attach the front seat to the :VAS6136Β  . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIRΒ .

-- Disconnect the connectors -2 through 5- on the control module -1-.

Fig 1: Harness Connectors -2 To 5- On Control Module -1-
GWWA72-10777Courtesy of AUDI OF AMERICA, LLC
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.