Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2013A5 PREMIUM QUATTRO, 2D CONVERTIBLE, ENG CD CAEBREPAIR AND DIAGNOSISBODY & FRAMESEATSSEAT FRAMES (CABRIOLET)72 SEAT FRAMESFRONT SEATSBACKREST LOCK SWITCH MICROSWITCH, CHECKINGBACKREST LOCK SWITCH, CHECKING
2013 Audi A5 Premium Quattro, 2D Convertible, Eng CD CAEB
Backrest Lock Switch, Checking
2013 Audi A5 Premium Quattro, 2D Convertible, Eng CD CAEBSECTION Backrest Lock Switch, Checking
-- Check the Driver Backrest Lock Switch -F211- or Front Passenger Backrest Lock Switch -F212- using the Analog/Digital Multimeter:FLU83III and adapter cables from the Connector Test Set:VAG1594C .
| PIN 1 + 3 | Specified value |
|---|---|
| Driver Backrest Lock Switch -F211- or Front Passenger Backrest Lock Switch -F212- not actuated | No flow (∞ Ohm) |
| Driver Backrest Lock Switch -F211- or Front Passenger Backrest Lock Switch -F212- actuated | Flow (approximately 0 Ohm) |
| PIN 1 + 2 | Specified value |
|---|---|
| Driver Backrest Lock Switch -F211- or Front Passenger Backrest Lock Switch -F212- not actuated | Flow (approximately 0 Ohm) |
| Driver Backrest Lock Switch -F211- or Front Passenger Backrest Lock Switch -F212- actuated | No flow (∞ Ohm) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.