Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2012A8 QUATTRO SEDAN (4H2) V8-4.2L (CDRA)REPAIR AND DIAGNOSISMAINTENANCESERVICE INTERVALSNORMAL SERVICE85000 MI OR 136000 KM
2012 Audi A8 Quattro Sedan (4H2) V8-4.2L (CDRA)
85000 MI or 136000 KM
2012 Audi A8 Quattro Sedan (4H2) V8-4.2L (CDRA)SECTION 85000 MI or 136000 KM
Reset
Tire Monitoring System
Service Reminder Indicators
Check
Wiper and Washer Systems
Wiper/Washer/Headlight Washer - Check adjustment and function, add fluid if necessary.
Wiper Blade
Check condition and replace if necessary.
Tires
Check tires incl spare (if equipped) for wear and damage, Check and adjust air pressure if necessary.
Brake Pad
Check thickness of brake pads visually (using flashlight through a hole in wheel)
Brake Hose/Line
Make sure brake hoses are not twisted. Check brake hoses for clearance when steering is at full lock. Check hoses for porosity, bubbles, chafing and cracks. Check brake line connections for leaks or corrosion. Check lines for secure attachments.
Brake Fluid
Check fluid level, add if necessary. Check for leaks at brake master cylinder, brake booster, calipers and ABS hydraulic unit.
Replace
Oil Filter, Engine
Engine Oil
Tire Monitoring System
Service Reminder Indicators
Check
Wiper and Washer Systems
Wiper/Washer/Headlight Washer - Check adjustment and function, add fluid if necessary.
Wiper Blade
Check condition and replace if necessary.
Tires
Check tires incl spare (if equipped) for wear and damage, Check and adjust air pressure if necessary.
Brake Pad
Check thickness of brake pads visually (using flashlight through a hole in wheel)
Brake Hose/Line
Make sure brake hoses are not twisted. Check brake hoses for clearance when steering is at full lock. Check hoses for porosity, bubbles, chafing and cracks. Check brake line connections for leaks or corrosion. Check lines for secure attachments.
Brake Fluid
Check fluid level, add if necessary. Check for leaks at brake master cylinder, brake booster, calipers and ABS hydraulic unit.
Replace
Oil Filter, Engine
Engine Oil
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.