Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2012A8 QUATTRO SEDAN (4H2) V8-4.2L (CDRA)REPAIR AND DIAGNOSISBODY AND FRAMERELAYS AND MODULES - BODY AND FRAMEPOWER DOOR LOCK CONTROL MODULESERVICE AND REPAIRDRIVER DOOR CONTROL MODULE J386 AND FRONT PASSENGER DOOR CONTROL MODULE J387
2012 Audi A8 Quattro Sedan (4H2) V8-4.2L (CDRA)
Driver Door Control Module J386 and Front Passenger Door Control Module J387
2012 Audi A8 Quattro Sedan (4H2) V8-4.2L (CDRA)SECTION Driver Door Control Module J386 and Front Passenger Door Control Module J387
Driver Door Control Module J386 and Front Passenger Door Control Module J387
- Remove the door trim panel.
- Push the release downward and disconnect the connectors.
- Press the tab in - direction of arrow - and disengage the door control module - 1 - from the door shell.
Installing
- Installation in reverse order of removal making sure the retainer locks into the inner door panel.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.