Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2012A6 SEDAN (4G2) L4-2.0L TURBO (CAEB)REPAIR AND DIAGNOSISSTEERING AND SUSPENSIONSTEERINGSTEERING COLUMNDESCRIPTION AND OPERATIONSTEERING COLUMN, HANDLING AND TRANSPORTING, MANUALLY ADJUSTABLE
2012 Audi A6 Sedan (4G2) L4-2.0L Turbo (CAEB)
Steering Column, Handling and Transporting, Manually Adjustable
2012 Audi A6 Sedan (4G2) L4-2.0L Turbo (CAEB)SECTION Steering Column, Handling and Transporting, Manually Adjustable
Steering Column, Handling and Transporting, Manually Adjustable
• The correct handling of the steering column must always be observed.
• Incorrect handling of steering column may cause damage to steering column and therefore lead to a safety risk.
Correct Handling and Transport of Steering Column
• Wearing gloves, hold the steering column with both hands and remove it from the shipping container.
• Hold the steering column by the upper column tube - 1 - and near the upper universal joint - 2 - as illustrated.
Incorrect Handling of Steering Column
Transporting at the following components leads to pre-damage to steering column:
1. Release handle
2. Weight balancing springs
• A steering column that has fallen onto a hard surface or shows signs of damage must not be installed in the vehicle.
• Do not lay the steering column on the splines.
• The splines must not get compressed.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.