Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2012A6 SEDAN (4G2) L4-2.0L TURBO (CAEB)REPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONS
2012 Audi A6 Sedan (4G2) L4-2.0L Turbo (CAEB)
System Specifications
2012 Audi A6 Sedan (4G2) L4-2.0L Turbo (CAEB)SECTION System Specifications
Fastener Tightening Specifications
Accessory Assembly Bracket - Tightening Specifications and Tightening Sequence
- Mount the accessory assembly bracket and then mount the bolts - 4 -.
- Tighten bolts in 3 stages in - 1 to 5 - sequence as follows:
Transmission Side Sealing Flange, Tightening Sequence
- Tighten the bolts - 1 through 8 - in the sequence shown:
- 1. Tighten the bolts hand-tight.
- 2. Tighten the bolts to 9 Nm.
Crankshaft, Tightening Sequence
- Tighten the crankshaft bolts in the sequence - 1 to 5 -.
- Tighten the bolts - 1 through 10 - and - arrows - hand-tight.
- Tighten the bolts - 1 through 10 - to 65 Nm.
- Tighten the bolts - 1 through 10 - 90° further using a rigid wrench.
- Tighten the bolts - arrows - to 20 Nm.
- Tighten the bolts - arrows - 90° further using a rigid wrench.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.