Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2012A6 SEDAN (4G2) L4-2.0L TURBO (CAEB)REPAIR AND DIAGNOSISBODY AND FRAMEMIRRORSSERVICE AND REPAIREXTERIOR REARVIEW MIRRORMIRROR ADJUSTING UNIT MOUNT
2012 Audi A6 Sedan (4G2) L4-2.0L Turbo (CAEB)
Mirror Adjusting Unit Mount
2012 Audi A6 Sedan (4G2) L4-2.0L Turbo (CAEB)SECTION Mirror Adjusting Unit Mount
Mirror Adjusting Unit Mount
Removing
- Remove the door trim..
- Remove the window frame trim..
- Remove the clip - 2 - and disconnect the connector - 1 -.
- Disconnect electrical harness connector - 7 -.
- Remove the plugs - 5 and 6 -.
- Remove the bolts - arrows -.
- Remove the mirror adjusting unit mount while guiding the grommet - 4 - and the wiring harness - 3 - out through the body opening.
Installing
• For the correct tightening specifications, refer to => [ Exterior Mirror Overview ] Exterior Mirror Overview.
Install in reverse order of removal. Note the following:
- Install the window frame trim..
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.