Body Control Module: Service and Repair

2012 Audi A4 Sedan (8K2) L4-2.0L Turbo (CAEB)SECTION Service and Repair






Comfort System Central Control Module (J393)

- If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or "Guided Functions" using the Vehicle Diagnostic Tester.

Removing






- Open the luggage compartment right side trim.

- Release the retaining clips - arrows - and remove the comfort system central control module (J393) - item 7 - from the retaining frame.

- Carefully disconnect the connector - 4 - and - 6 - and the antenna connector - 3 -.

- Disconnect the connectors - 1, 2 and 5 -.

- To disconnect electrical connector, press catch - 1 -, turn retaining bracket in - direction of arrow - and remove connector.






- Remove the comfort system central control module.

Installing

Install in reverse order.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.