Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Seat Ventilation Control Module Overview
2012 Audi A4 2.0T Avant QuattroSECTION Seat Ventilation Control Module Overview
- Seat Ventilation Control Module (Integrated in the Seat Heating)
- Versions with driver side seat heating: left front seat ventilation control module -J800-
- Versions with passenger side seat heating: right front seat ventilation control module -J799-
- Clipped with the bracket
- Removing and installing, refer to RIGHT FRONT SEAT VENTILATION CONTROL MODULE (SEAT HEATER INTEGRATED) -J799- / -J800-
- Bracket
- Removing and installing, refer to MEMORY SEAT/STEERING COLUMN ADJUSTMENT CONTROL MODULE BRACKET
- Engaged and clipped in the seat pan
- Front Seat
- Pin
- For securing the bracket to the seat pan
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.