Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Refrigerant R134A Vapor Pressure Table
The vapor pressure table for every refrigerant is published in literature for refrigeration system engineers. This table makes it possible to determine the vapor pressure acting on the column of liquid in a vessel if the temperature of the vessel is known.
Because each refrigerant has its own characteristic vapor pressure table, refrigerant can be identified by measuring the pressure and temperature.
- At absolute pressure, 0 bar corresponds to absolute vacuum. Normal ambient pressure (positive pressure) equals 1 bar absolute pressure. 0 bar pressure corresponds to an absolute pressure of one bar on most pressure gauges (indicated by -1 bar below 0).
- Pressure is measured in different units: 1 MPa (mega Pascal) corresponds to 10 bar positive pressure or 145 psi, 1 bar absolute pressure corresponds to 0 bar positive pressure and thus to the ambient pressure (atmospheric pressure).
| Temperature in °C (°F) | Pressure in Bar (Positive Pressure) (PSI) of R134a |
|---|---|
| -45 (-49) | -0.61 (-8.84) |
| -40 (-40) | -0.49 (-7.10) |
| -35 (-31) | -0.34 (-4.93) |
| -30 (-22) | -0.16 (-2.32) |
| -25 (-13) | 0.06 (0.87) |
| -20 (-4) | 0.32 (4.64) |
| -15 (5) | 0.63 (9.13) |
| -10 (14) | 1.00 (14.5) |
| -5 (23) | 1.43 (20.74) |
| 0 (32) | 1.92 (27.84) |
| 5 (41) | 2.49 (36.11) |
| 10 (50) | 3.13 (45.39) |
| 15 (59) | 3.90 (56.56) |
| 20 (68) | 4.70 (68.16) |
| 25 (77) | 5.63 (81.65) |
| 30 (86) | 6.70 (97.17) |
| 35 (95) | 7.83 (113.56) |
| 40 (104) | 9.10(113.98) |
| 45 (113) | 10.54(152.86) |
| 50 (122) | 12.11 (175.64) |
| 55 (131) | 13.83 (200.58) |
| 60 (140) | 15.72 (227.99) |
| 65 (149) | 17.79 (258.02) |
| 70 (158) | 20.05 (290.80) |
| 75 (167) | 22.52 (326.62) |
| 80 (176) | 25.21 (365.64) |
| 85 (185) | 28.14 (408.13) |
| 90 (194) | 31.34 (454.54) |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.