Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2010A3 2.0T, 2.0 E, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 19 (2.0L - ENGINE ASSEMBLY - ENGINE CODE(S): BPY)10 ENGINE ASSEMBLYDESCRIPTION AND OPERATIONSUBFRAME OVERVIEW
2010 Audi A3 2.0T, 2.0 E, Standard
SUBFRAME Overview
2010 Audi A3 2.0T, 2.0 E, StandardSECTION SUBFRAME Overview
WARNING: This page is about a different car, the 2008 Audi A3, 2007 Audi A3, and 2006 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Transmission support to transmission
- Tightening specification, refer to SUBFRAME MOUNT ASSEMBLY OVERVIEW
- Tightening specification, refer to SUBFRAME MOUNT OVERVIEW
- Bolts
- Pendulum supports to transmission
- Tightening specification, refer to SUBFRAME MOUNT ASSEMBLY OVERVIEW
- Tightening specification, refer to SUBFRAME MOUNT OVERVIEW
- Engine Support
- With support arm
- Bolt
- 45 Nm
- Engine support to engine
- Engine Mount
- Bolt
- Replace
- 40 Nm plus an additional 90° turn.
- Engine mount to body
- Bracket
- Bolt
- Replace
- 20 Nm plus an additional 90° turn.
- Bracket to engine mount
- Bolt
- Replace
- 20 Nm plus an additional 90° turn.
- Bracket to body
- Bolt
- Replace
- 40 Nm plus an additional 90° turn.
- Engine mount to body
- Bolts
- Replace
- 60 Nm plus an additional 90° turn.
- Engine mount to engine support
- Pendulum Support
- Bolt
- Pendulum supports to subframe
- Tightening specification, refer to SUBFRAME MOUNT ASSEMBLY OVERVIEW
- Tightening specification, refer to SUBFRAME MOUNT OVERVIEW
- Bolt
- Transmission mount to transmission support
- Tightening specification, refer to SUBFRAME MOUNT ASSEMBLY OVERVIEW
- Tightening specification, refer to SUBFRAME MOUNT OVERVIEW
- Bolt
- Transmission mount to body
- Tightening specification, refer to, SUBFRAME MOUNT ASSEMBLY OVERVIEW
- Tightening specification, refer to SUBFRAME MOUNT OVERVIEW
- Transmission Mount
- With support arm
- Bolt
- Transmission support to transmission
- Tightening specification, refer to SUBFRAME MOUNT ASSEMBLY OVERVIEW
- Tightening specification, refer to SUBFRAME MOUNT OVERVIEW
- Bolt
- Transmission support to transmission
- Tightening specification, refer to SUBFRAME MOUNT ASSEMBLY OVERVIEW
- Tightening specification, refer to SUBFRAME MOUNT OVERVIEW
- Transmission Support
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.