Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2009A6 QUATTRO, 3.0, CAJAREPAIR AND DIAGNOSISMAINTENANCEPROCEDURESMAINTENANCE PROCEDURES
2009 Audi A6 Quattro, 3.0, CAJA
Maintenance Procedures
2009 Audi A6 Quattro, 3.0, CAJASECTION Maintenance Procedures
- 03 Maintenance, Diagnosis
- General Information
- Maintenance Procedures
- Measured Values Block 32, Reading
- Transport Mode, Deactivating
- Battery, Checking Level Using Guided Fault Finding
- Battery, Checking Fluid Level
- AGM Battery, Checking
- Tires, Checking
- Brake Fluid, Changing
- Brake System, Inspecting Visually For Leaks And Damage
- Brake Pads, Checking Thickness
- Brake Pads, Checking Thickness (RS6)
- Brake Fluid, Checking Depending On Brake Pad Wear
- Digital TV Tuner, Programming Remote Control
- Fuel Injector Cleaner G17
- Key, Check Functionality
- DTC Memory, Checking Using Vehicle Diagnosis, Testing And Information System Vas 5051/5052
- Noise Insulation, Removing
- Front Axle Joints, Checking Play, Security And Joint Boots
- Power Steering System, Checking For Leaks And Checking Fluid Level And Filling
- Interior Rearview Mirror With Compass, Calibrating
- Ribbed Belt, Check Tension And Condition
- License Plate, Attaching
- Air Conditioning, Check Function And Setting Temperature
- Coolant System, Checking
- Throttle Valve Control Module Air Guide, Cleaning, RS6
- Air Filter, Clean Air Filter Housing And Replace Air Filter
- Engine And Engine Compartment, Inspecting For Leaks And Damage
- Engine Cover, Removing And Installing
- Engine Oil, Draining And Replacing Filter
- Engine Oil, Filling
- Engine Oil, R S6, Filling
- Engine, Checking Oil Level
- Navigation Eject Button, Unlocking
- Road Test
- Wheel Bolts, Tightening Specifications
- Windshield Washer System, Checking And Adjusting Spray Nozzles
- Headlamp Washer System, Checking Spray Nozzles
- Headlamps, Checking And Adjusting
- Windshield Washer System, Filling Fluid
- Windshield Wiper Blades, Checking End Position And For Damage
- Windshield Wiper Blades, Removing And Installing
- Sunroof, Cleaning And Lubricating
- Snow Screen, Cleaning
- Service Display, Resetting Or Adapting
- Language, Selecting
- Dust And Pollen Filter, Removing And Installing
- Transport Protection, Removing Front And Rear Shock Absorber Protectors
- Door Arrester, Hinge, Hood Safety Catches And Lock Cylinder, Lubricating
- Underbody, Inspecting For Damage
- Plenum Chamber Cover, Removing
- Plenum Chamber Water Drain, Checking And Cleaning
- Factory-Equipped Winter Tires
- Clock, Setting
- Spark Plugs, Removing And Installing
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.