Special Tools

Special tools and workshop equipment required 

• Puller - Multiple UseVW391
• Slide Hammer SetVW771
• Slide Hammer Set - HookVW771/37
• Seal Installer - Propshaft Flange T40112
• Retainer - Drive Flange 3028
• Seal Installer - Wheel Bearing Seal 3143
• -3- Puller - Quick Action Separating Tool - 22-115mm, such as Kukko 17/2
  Fig 2: Identifying Kukko Puller

  Courtesy of AUDI OF AMERICA, LLC
• Puller - Flanged ShaftT10037
  Fig 3: Identifying Extractor T10037

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Flange Shaft T40110
  Fig 4: Identifying Thrust Piece T40110

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Flange Shaft T40111
  Fig 5: Identifying Thrust Piece T40111

  Courtesy of AUDI OF AMERICA, LLC
• Counterhold - Kit - Multiple Use T10172 with Adapters T10172/5
  Fig 6: Counter-Holder Tool T10172

  Courtesy of AUDI OF AMERICA, LLC
• Torque Wrench 40-200NmVAG1332
  Fig 7: Identifying Torque Wrench 40-200 Nm V.A.G 1332

  Courtesy of AUDI OF AMERICA, LLC
• Drip Tray VAG1306
  Fig 8: Drip Tray V.A.G 1306

  Courtesy of AUDI OF AMERICA, LLC
• Torque Wrench 5-50NmVAG1331
  Fig 9: Ident ifying Torque Wrench (5 To 50 Nm) V.A.G 1331

  Courtesy of AUDI OF AMERICA, LLC
• Engine/Gearbox Jack VAG1383 A with Engine/Gearbox Jack - Pin VAG1359/2
  Fig 10: Engine & Transmission Jack VAG 1383 A

  Courtesy of AUDI OF AMERICA, LLC
• Torque Wrench 80-400Nm VAG1576
  Fig 11: Identifying Torque Wrench V.A.G 1576

  Courtesy of AUDI OF AMERICA, LLC
• Friction Gauge VAS6222
  Fig 12: Friction Meter VAS 6222

  Courtesy of AUDI OF AMERICA, LLC
• Bearing/Bushing Installer - Multiple UseVW295
  Fig 13: Bearing/Bushing Installer - Multiple Use VW295

  Courtesy of AUDI OF AMERICA, LLC
• Dial Gauge HolderVW387
  Fig 14: Dial Gauge Holder VW 387

  Courtesy of AUDI OF AMERICA, LLC
• Press PlateVW401
  Fig 15: Identifying Thrust Plate VW 401

  Courtesy of AUDI OF AMERICA, LLC
• Press PlateVW402
  Fig 16: Identifying Thrust Plate VW 402

  Courtesy of AUDI OF AMERICA, LLC
• Press Piece - RodVW407
  Fig 17: Identifying Punch VW 407

  Courtesy of AUDI OF AMERICA, LLC
• Dial Gauge
• Circlip Sleeve 32 - 119
  Fig 18: Identifying Sleeve 32 - 119

  Courtesy of AUDI OF AMERICA, LLC
• Bearing Installer - Multiple Use 3062
  Fig 19: Bearing Installer - Multiple Use 3062

  Courtesy of AUDI OF AMERICA, LLC
• Driveshaft Alignment Fixture 3139
  Fig 20: Alignment Fixture - 4W Dr. Shaft 3139

  Courtesy of AUDI OF AMERICA, LLC
• Pry Lever80 - 200
  Fig 21: 80-200 Pry Lever

  Courtesy of AUDI OF AMERICA, LLC