Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSAUDI2009A6 BASEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 56 (FLUID CAPACITY TABLES)FLUID CAPACITY TABLESMODEL YEAR: 2010
2009 Audi A6 Base
Model Year: 2010
2009 Audi A6 BaseSECTION Model Year: 2010
WARNING: This page is about a different car, the 2010 Audi S6 and 2010 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
All quantities are approximate. Always refer to the Repair Information and/or the Maintenance Procedures for correct filling instructions.
Part numbers are for reference only.
| Component/System | Capacity | Part Number/Specification | |
|---|---|---|---|
| 3.0T Engine | |||
| Oil and Filter Change | 6.5 L (6.9 qt.) | VW 502 00 | |
| Coolant | 9.6 L (10.1 qt.) | G 012 A8G | |
| 3.2 L Engine | |||
| Oil and Filter Change | 6.5 L (6.9 qt.) | VW 502 00 | |
| Coolant | 9.6 L (10.1 qt.) | G 012 A8G | |
| 4.2 L Engine | |||
| Oil and Filter Change | 8.5 L (9.0 qt.) | VW 502 00 | |
| Coolant | 12.0 L (12.7 qt.) | G 012 A8G | |
| 5.2 L Engine | |||
| Oil and Filter Change | 10.0 L (10.6 qt.) | VW 502 00 | |
| Coolant | 15.0 L (16.0 qt.) | G 012 A8G | |
| Continuously Variable Transmission 01J | |||
| Initial Fill | 7.5 L (7.9 qt.) | G 052 180 A2 | |
| Refill | 4.5 - 5.0 L (4.8 - 5.3 qt.) | ||
| Front Final Drive | 1.3 L (1.4 qt.) | G 052 190 A2 | |
| 6 Speed Automatic Transmission 09L | |||
| Initial Fill | 9.8 L (10.4 qt.) | G 060 162 A2 | |
| Refill | 8.0 L (8.5 qt.) | ||
| Transfer Case | 0.6 L (0.6 qt.) | G 055 145 A2 | |
| Front Final Drive | 1.1 L (1.2 qt.) | G 052 145 S2 | |
| Rear Final Drive | 0.9 L (1.0 qt.) | ||
| 6 Speed Automatic Transmission 09E | |||
| Initial Fill | 10.4 L (11.0 qt.) | G 055 005 A2 | |
| Refill | 10.0 L (10.6 qt.) | ||
| Front Final Drive | 1.2 L (1.3 qt.) | G 052 145 S2 | |
| Transfer Case | 1.2 L (1.3 qt.) | G 055 145 S2 | |
| Rear Final Drive | 0.9 L (1.0 qt.) | G 052 145 S2 | |
| Brake System | |||
| - | 1.0 L (1.1 qt.) | B 000 750 | |
| A/C System | |||
| Refrigerant | 530 ± 20g (18.7 ± 0.7 oz.) | See ETKA | |
| PAG Oil | 130 ± 10 cc (4.4 ± 0.3 fl. oz.) | G 052 300 A2 | |
| Window/Headlamp Washer System | |||
| - | 4.8 L (5.1 qt.) | G 052 164 | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.