Vehicle Electrical System Control Module - J519: coding

2009 Audi A6 BaseSECTION Vehicle Electrical System Control Module - J519: coding
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Enter vehicle information; all control modules are interrogated.

  • Press the following selections in the order shown:
  • Go To
  • Functions and component selection
  • Body
  • Electrical Equipment
  • 01 On Board Diagnostic (OBD) capable systems
  • Electrical system (Highline or Lowline depending on vehicle equipment)
  • Electrical system function
  • J519 Vehicle Electrical System Control Module, coding
  • Press button

Follow tester steps and confirm entry until following text appears:

OK J519 Vehicle Electrical System Control Module, coding

  • Press the following selections in the order shown:
  • Go To
  • End
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.