Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Service display: Resetting or adapting: Notes
2009 Audi A6 BaseSECTION Notes
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Service display serves to remind the driver of service needed. The display appears in the center display.
- Service indicators appears 1 month or 2.000 km before reaching service interval. It disappears after 100 km. Example display: After a total driving distance of 28,700 km, "SERVICE IN 13.0 KM" appears.
- The distance remaining to the service interval can be viewed via the center display menu by press button - 1 - once.
- When a service interval arrives, the text information appears in the center display for 5 seconds after switching ignition on. It is shown after automatic transmission message and a possible navigation system destination. Display: "SERVICE!".
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.