Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Coolant Pipes Assembly Overview
2009 Audi A6 BaseSECTION Coolant Pipes Assembly Overview
- Left coolant pipe
- Together with -item 16- removing and installing, refer to LEFT COOLANT PIPES
- 9 Nm
- O-ring
- Replace
- Connecting hose
- 9 Nm
- Front coolant line
- Removing and installing, refer to FRONT COOLANT PIPE
- 9 Nm
- O-ring
- Replace
- Engine Coolant Temperature (ECT) Sensor -G62-
- Removing and installing, refer to ENGINE COOLANT TEMPERATURE SENSOR
- Retaining clip
- Seal
- Replace
- O-ring
- Replace
- Upper coolant line
- Removing and installing, refer to UPPER COOLANT PIPE
- 9 Nm
- Seal
- Replace
- Left coolant pipe
- Together with -item 1- removing and installing, refer to LEFT COOLANT PIPES
- 9 Nm
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.