Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Battery Post/Terminal
2009 Audi A6 BaseSECTION Battery Post/Terminal
CAUTION:
In order to prevent damage to the battery terminals and battery posts, observe the following:
- Never use force to attach the battery terminals by hand.
- Do not apply grease to battery posts.
- The battery terminal clamps should be mounted so that the battery terminal sits flush with the clamp or protrudes out of it.
- After tightening the battery terminal clamps to the specified torque, the threaded connections must not be tightened again.
Terminal clamp tightening specification. Refer to BATTERY, DISCONNECTING AND CONNECTING .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.